SETTING MODE
57
Setting the Limit Link
Search
This setting is used for linking a limit
search.
1
Display a limit search to be linked
to another limit search.
2
Hold down the FUNC key and
press the dial knob to select the
setting mode.
3
Turn the dial knob to set the
setting mode number 10.
4
Hold down the FUNC key and turn
the dial knob to select the limit link
number to be linked for the limit
link which is displayed in step 1.
• The Setting mode number will
be replaced with a search band
memory number.
5
Press the dial knob.
• The search link mark is displayed.
6
Press the dial knob to setting
mode.
7
To return the original display, press
the dial knob or V/M key.
Tips:
To cancel the link limit search,
repeat steps 1 through 4 and select
the link limit search number to be
canceled. And then, press the dial
knob.
To Next Page
Loading...
