ADVANCED OPERATION
32
2VFO Watch
Two frequencies are stored in the 2VFO
watch memory in VFO mode. Each
frequency is watched, and then either
frequency is received, the 2VFO watch
is paused while receiving.
1
Confirm VFO mode is set.
2
Turn the dial knob to set a
frequency to be stored as the
2VFO watch memory A.
3
To store the frequency in the 2VFO
watch memory, hold down the
FUNC key and press the
v key for
2 seconds or more.
• “DWA W” is displayed.
4
Turn the dial knob to set another
frequency to be stored as the
2VFO watch memory B.
5
To store the frequency in the 2VFO
watch memory, hold down the
FUNC key and press the
v key for
2 seconds or more.
• “DWB W” is displayed.
6
Press the v key for 2 seconds or
more to start the 2VFO watch.
7
To cancel the priority watch press
the V/M key.
To Next Page
Loading...
