AOR AR-Mini - Limit Link Search Operation

ADVANCED OPERATION
37
Limit Link Search
This enables a linked limit search for
easy change of limit ranges.
1
Confirm VFO mode is set.
2
Hold down the FUNC key and
press the dial knob to enter the
setting mode.
3
Turn the dial knob to set the
setting mode number 08.
4
Hold down the FUNC key and turn
the dial knob to select LTLNK.
• “VFO” is displayed at initial.
5
Turn the dial knob to set the
setting mode number 10.
7
Hold down the FUNC key and turn
the dial knob to select the limit
search number to be linked.
8
Turn the dial knob to decide the
link number.
• The decimal point is displayed on
the link number.
9
Hold down the FUNC key and turn
the dial knob to select next limit
search number to be linked.
10
Turn the dial knob to decide the
link number.
• The decimal point is displayed on
the link number.
11
Press the dial knob or V/M key
twice to return to VFO mode.
12
To start the limit link search, press
the SCAN key.
13
To stop the limit link search, press
the SCAN key.