AOR AR-Mini - Memory Naming and Scanning

ADVANCED OPERATION
42
Naming Memory
Memory can be named using up to 6
characters.
1
Confirm the memory mode is set.
2
Turn the dial knob to recall the
desired memory to be named.
3
Hold down the FUNC key and
press the SCAN key.
• The cursor is blinking.
4
Turn the dial knob to select a
character.
5
To change the cursor, hold down
the FUNC key and turn the dial.
6
To store a name, hold down the
FUNC key and press the V/M key.
Tips:
To change the character, repeat
steps 1 through 3, hold down the
FUNC key and turn the dial to select
the character to be changed. Turn
the dial knob to select new character
and then hold down the FUNC key
and press the V/M key.
The Memory Scanning
All memory can be scanned.
1
Confirm VFO mode is set.
2
Hold down the FUNC key and
press the dial knob to enter the
setting mode.
3
Turn the dial knob to set the
setting mode number 09.
4
Hold down the FUNC key and turn
the dial knob to select ALL.
5
To return original VFO, Press the
dial knob or V/M key.
6
Press the V/M key to enter the
memory mode.
7
Press the SCAN key to start the
memory scan.
8
To return the memory mode, press
the V/M key.