ARC Audio PS8 - High Pass Crossover Filter Type Adjustment Window; HP Crossover Frequency Selection Controls; HP Crossover Slope Selection Window

12.4.4 - High Pass Crossover Filter Type Adjustment Window
The HP crossover lter adjustment gives users all of the tools needed to customize the High Pass portion of
each channel individual crossovers.
(See diagram 12.17)
(Note: When in the crossover user interface panel, if at any time you see any section that is muted in color and
does not respond to your attempted operation, it is because you do not have your features set up correctly or
you may not be in the correct operation mode allowing you access to these features. If at any time you are
uncertain of how to use any of these features, please stop, put down the computer and take your vehicle to an
authorized ARC Audio retailer for help.)
12.4..4.1- HP Crossover Slope Selection Window
The PS8 oers users the ability to select between
6/12/18/24/30/36/42/48 dB slopes on all of its crossovers. To
select the desired crossover slope, simply click on the check
box next to the value you want. If on a band pass crossover,
the slopes do not have to match and can dier between the
LP and HP operations.
(See diagram 12.18)
12.4.4.2 - HP Crossover Frequency Selection Controls
The PS8 oers the most extensive selection of crossover frequencies available to the car audio market.
Available from 20.0hz to 20.0kHz, the PS8 gives users 199,800 dierent frequencies per band, per lter
type, to choose from. To select the desired High Pass frequency, you can simply type frequency in the
display readout, click on and drag the slider with your PC's pointer, or click on the slider and then
adjust incrementally with the arrow keys on your keyboard.
(See diagram 12.19)
Diagram 12.17
Diagram 12.18
Diagram 12.19