16.13 After sending a setting le from the PC to the PS8 the other presets do not properly reect what the
software is displaying on the other presets.
1. Each setting le stored on your PC contains all of the information for all three presets. When starting the
PS8 software you are prompted to choose to either send or receive the full or part of a individual setting
le stored on your PS8 or the PC.
2. If you choose to only send on preset you will have to send each preset individually to the preset or
choose the option "Send All" to send all three presets to the PS8 from the PC on an individually stored
setting le.
16.14 After installing/updating the PS8 software onto the PS8 there is no PS8 Software Icon on my desktop or
favorites menu.
1. After installing the software you will nd it located by pressing your "Start" button > “All Program” >
“ARC Audio” > “PS8” > "ARC Audio PS8" . If you wish to have this software have a desktop shortcut, right
click on the wording "ARC Audio PS8" in this menu and then left click on "Send" > "Desktop (Create
Shortcut)"
16.15 When using analog or digital inputs in conjunction with a remote turn on input trigger, upon rst re up
and start the PS8 makes a digital noise and sometimes does not start up properly.
1. Unscrew the top case logo display and make sure that the auto-sense disable jumper is installed
correctly. Having the Auto-sense disable jumper removed in addition to using a remote turn on input
lead can cause unwanted results in overall operation and startup performance.
16.16 The PS8 takes an excessive amount of time to turn on.
1. The remote turn on delay timing has not initialized
• To solve this problem you will need to reset the processors turn on/of delays. Find the button
named as "Setup" on the top header of the PS8's software utility window Then nd and click on
"on/o" delays. Once the "on/o delay's panel" is open please adjust each of the sliders to a
dierent setting, even if only .01 seconds dierent and then click "OK" and then turn the PS8 o
and then back on to initialize the settings.
16.17 The PS8 takes an excessive amount of time to turn o or will not turn o.
1. The remote turn on delay timing has not initialized
• To solve this problem you will need to reset the processors turn on/of delays. Find the button
named as "Setup" on the top header of the PS8's software utility window Then nd and click on
"on/o" delays. Once the "on/o delay's panel" is open please adjust each of the sliders to a
dierent setting, even if only .01 seconds dierent and then click "OK" and then turn the PS8 o
and then back on to initialize the settings.
• If the unit will not turn o at all, after completing the process above unplug the PS8's main
power connection plug and then with the input remote turn on lead still active plug the termi-
nal block back in and you will complete the initializing process of the new settings.
To Previous Page
Loading...