Atlas Copco FOCUS 61

Table of Contents Focus 61 User Guide
9839 0211 01 Edition 2.0 4 (118)
Edition
Date
Author
Description
Reference
Minimum
Software
version (TT
BLM)
Reference
Firmware
version
1.9
11
October
M.
Morello
Specifications updated (par. 1.2), Display updated
(par. 4.1), Ethernet Ports updated (par. 4.4), I/O BUS
(CAN) (par. 4.6) updated, Digital output updated (par.
4.9), Digital Ports updated (par.5), Connecting with the
Focus 61 updated(par. 5.4), PROGRAMMING Focus
61 updated (par.6), Pset parameters settings –
Strategy updated (par. 6.3.1) Pset parameters settings
- Torque Limits updated (par. 6.3.2) Identifier for
multibarcode reading updated (par. 6.5), Configuring
identifiers updated (par. 6.5.1), Configuring identifier to
abort Jobs updated (par. 6.5.2), Adding a I/O
Expander open (par. 6.6.4), LIVE MONITOR updated
(par. 8), APPENDIX A – ATLAS OPEN PROTOCOL
(AOP) updated (par. 18), APPENDIX B – ERROR
CODE AOP updated (par.19), Focus 60 phase-out,
MWR-T phase out.
10.14.x
8.1.9
(package 4.6.0)
2.0
15 April
2020
M.
Morello
LEDs updated (par. 4.3), Digital output updated (par.
4.9), Linking the MWR with Station(s) updated (par.
6.2), Adjustment Factors function – Show Ping Status
function added (par. 6.3).
10.15.x
8.2.0
(package 4.7.0)
Copyright Atlas Copco Industrial Technique AB
NOTE: This User Guide may be altered without further notice.
For further information log on to the Atlas Copco website: www.atlascopco.com
NOTE: The programming software (ToolsTalk BLM) may be updated with no changes
regarding the Focus 61 functionalities.
The Reference Firmware version requires a specific Software version (for further details refer to
the above “Revision history” table).
NOTE: In case of conflicts between translations of this User Guide, always refer to the official
English version.