Atlas Copco FOCUS 61 - Page 61

Focus 61 User Guide Programming Focus 61
61 (118) 9839 0211 01 Edition 2.0
There will be two results as well as in the first example, but the second tightening result will be
marked as TOK or TNOK, depending on whether the torque was inside the specified limits:
• Max angular rate [°/s]
Angular speed of the wrench.
A
Torque
B
Cycle Start
C
Timeout
D
Dead Time
E
Time
F
Result 1
A
B
D
C
F
E