Atlas Copco FOCUS 61

Focus 61 User Guide Programming Focus 61
63 (118) 9839 0211 01 Edition 2.0
• Job Name
Name of the Job.
• Job Order
- Fixed: The Steps of the Job are executed in the order specified in the window above.
- Free: The Steps of the Job are executed according to the Optional Trigger defined in the Step
parameter. The Optional Trigger is a barcode string that must be scanned before executing
the step.
See below for further details about the Step parameters.
• NOK Strategy
- Abort: If a Step is executed with Not OK result, the Job is aborted.
- Continue: If a Step is executed with Not OK result, the Job continues.
• Timeout [s]
Maximum time (in seconds) to complete the Job. If it is equal to zero there is no control on the
time. By default it is set on 120 seconds.
• Lock After Job Done
If enabled, the MWR is locked at the end of the Job (the Job must start again to continue).
If disabled, a new Job restarts automatically when the previous Job is complete.
NOTE: The total number of Jobs is equal to 1000. They are distributed as follows: 300 Jobs for
Station 1, 300 Jobs for Station 2 and 400 Jobs for global (shared between Stations).
At the end of the configuration, click Save.
NOTE: Save is unavailable if there are no steps in the Job.
To add a Step, enter the parameters in the Add Step area and click Add Step:
• Name
Step name.
• Group
Select the group from the list of Group associated with the Station.
• Batch Size
Number of bolts which need to be tightened (Batch).
• Infinite Batch Size
Selecting Infinitive batch Size option, the Step works an infinite number of times/bolts. This
option disables Batch size setting.