Atlas Copco PowerMACS 4000 User Manual

Set Up and Maintenance
118 9836 3521 01
Here you may also change the type of the spindle and the TC corresponding to it.
Press Next >>. If you specified fewer spindles than bolts in the second wizard dialog you will be displayed
the following dialog:
Use the combo boxes in the Spindle column to select the spindle to be used to control each of the bolts.
Press Next >> to display the next wizard dialog.

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English