Atlas Copco PowerMACS 4000

Appendix
634 9836 3521 01
Code
Comp
Code
Type
Severity
Event string
1708
230
Setup
Error
Fieldbus on TC %d requires Data bytes Out > %d to auto load
cycle data
1709
231
Ext. com
Error
Fieldbus on TC %d rec. a Flush/Skip req. (0x%x) for an invalid
address %d
1710
232
Ext. com
Error
Fieldbus on TC %d rec. an ambig. req. (0x%x) (>1 of R, W, F &
S are set)
1711
233
Ext. com
Error
Fieldbus on TC %d rec. a req. (0x%x) having an invalid
extended format
1712
234
Ext. com
Error
Fieldbus on TC %d rec. a req. (0x%x) having an invalid address
(%d)
1713
235
System
Error
Fieldbus on TC %d is not licensed
1901
237
System
Error
API on TC %d rec. an illegal message (err %d, info %d)
1902
238
System
Error
API on TC %d rec. a Read Setup req. Only allowed on TC 1
1903
239
System
Error
API on TC %d rec. a Write Setup req. Only allowed on TC 1
1904
240
System
Error
API on TC %d rec. a Read Setup Item req. Only allowed on TC
1
1905
241
System
Error
API on TC %d rec. a Write Setup Item req. Only allowed on TC
1
1906
242
System
Info
API on TC %d failed to send answer (cmd=%d, ret=%d)
2001
243
System
Error
CCH: Error when receiving (type=%d, d1=%d, d2=%d)
2005
247
System
Error
CCH: Unable to delete trace (first failing TC=%d)
2006
248
System
Error
CCH: Unable to delete events (first failing TC=%d)
2007
249
System
Error
CCH: Unable to delete cycle data (first failing TC=%d)
2008
250
System
Error
CCH: Unable to delete SPC data (first failing TC=%d)
2009
251
System
Error
CCH: Link message is too big (sock=%d, size=%d)
2010
252
System
Error
CCH: Link message has no header (sock=%d)
2011
892
General
Error
CCH: Function GetSetupObject() used
2100
253
System
Error
REP: Calculated size wrong (value=%f, width=%d, ndec=%d)
2101
433
Setup
Error
REP: Invalid date/time format selected
2201
254
System
Error
IO: two units with same address
2202
255
System
Error
IO: Illegal channel
2203
256
System
Error
IO: No CAN driver found
2204
257
Hardware
Error
IO: TC %d, chan %d. Subscriber not found
2205
258
Ext. com
Error
IO: Error communicating with I/O device (TC %d, identity %d)
2206
893
Ext. com
Error
IO: Error when configurating I/O signal (TC %d, MacId %d, Err
%d)