Atlas Copco PowerMACS 4000

Appendix
636 9836 3521 01
Code
Comp
Code
Type
Severity
Event string
3308
369
Setup
Error
Fieldbus on TC %d: Setting Node addr. by SW is not supported
3309
370
Setup
Error
Fieldbus on TC %d: Setting Baude Rate by SW is not supported
3310
371
Setup
Error
Fieldbus on TC %d: Configured Baude Rate (%d) is not
supported
3311
372
Setup
Error
Fieldbus on TC %d: Configured Source Node addr. (%d) is out
of range
3312
373
Setup
Error
Fieldbus on TC %d: Source no. of words (%d) is > Fast bytes In
/ 2 (%d)
3313
374
Setup
Error
Fieldbus on TC %d: Source Offset + Source no. of words (=%d)
must be <= 32
3314
375
Setup
Error
Fieldbus on TC %d: Unsupported param used (Modbus specific)
3315
543
Setup
Error
Fieldbus on TC %d: Configured Number of Stations (%d) is not
supported
3316
897
Setup
Error
Fieldbus on TC %d: Config error. PLC bytes in/out must be over
0.
3317
898
Ext. com .
Error
Fieldbus on TC %d: Error! Fieldbus could not be initialized!
3318
910
Setup
Error
Fieldbus on TC %d: Configuration error. (%d)!
3402
377
System
Error
ToolsNet: Illegal message received (error type %d, info %d)
3403
378
Ext.com.
Info
Toolsnet: Connection to server established using protocol ver.
%f
3404
379
Ext.com.
Error
Toolsnet: Connection to server lost
3405
380
Setup
Error
ToolsNet: Bad Data IP address (%X)
3406
381
Setup
Error
ToolsNet: Bad Status IP address (%d)
3407
428
Ext. com
Info
ToolsNet: Wrong TgmId received for Ack, Exp.=%d, Rec.=%d
3408
429
Ext. com
Info
ToolsNet: Wrong SeqNo received for Ack, Exp.=%d, Rec.=%d
3409
430
Ext. com
Error
ToolsNet: Timeout when waiting for Acknowledge
3410
456
Ext. com
Error
ToolsNet: Wrong message ver., TgmId: %d, TgmVer: %d (exp.),
%d (rec.)
3411
457
Ext. com
Error
ToolsNet: ToolsNet rejected protocol version %f
3412
458
Ext. com
Warning
ToolsNet: Telegram Id %d is not supported in protocol version
%f
3413
459
Setup
Error
ToolsNet: Entered protocol version %f is not supported in
PowerMACS
3414
622
Ext. Com.
Error
ToolsNet: Link closed by server (state %d)
3415
623
Ext. Com.
Error
ToolsNet: Link closed due to error %d (state %d)
3416
624
Ext. Com.
Error
ToolsNet: Link closed due to send congestion (error %d, state
%d)