Appendix
640 9836 3521 01
EPH: Cannot enable chan. %d since it is not selected (no PRS
received)
EPH: Start failed since no groups or channels are specified
EPH: Too large XML message
EPH: Master PC PNR %d not supported. PNR of Audi XML
device is %d
EPH: Cannot disable group %d since it is not enabled
EPH: Cannot disable chan. %d since it is not enabled
EPH: Cannot disable chan. %d of group %d since it is not part of
the group
EPH: Group %d cannot be started since it is not enabled
EPH: Channel %d cannot be started since it is not enabled
EPH: Start failed since group %d is already running
EPH: Start failed since chan. %d is already running
EPH: Start failed since station %d used by group %d already is
occupied
EPH: Start failed since station %d used by chan. %d already is
occupied
EPH: Start failed since groups does not have the same batch
parameters
EPH: Start failed since chan. %d of group %d already is
occupied
EPH: Start failed since chan. %d already is occupied
EPH: Start/stop of station %d failed due to connection problem
EPH: Group %d cannot be selected since it does not have ny
channels
EPH: Manual start ignored since device is not configured for
manual control
EPH: Manual loosen ignored since it is not enabled by the
Master PC
EPH: Chan. %d cannot be selected since there is no program
with no. %d
EPH: %s without KNR is not supported
EPH: %s without GRS and KNR is not supported
EPH: %s with both GRS and KNR is not supported
EPH: Start of station %d failed. Machine stopping all stations
EPH: VW Variant not allowed on systems with more then one
TC
To Next Page
Loading...
