AudioCodes Mediant 3000 User Manual

Version 7.0 253 Mediant 3000
User's Manual 16. Services
Parameter Description
user's username-password combination. For example, $.
Notes:
 The parameter is mandatory.
 By default, the device sends the password in clear-text format. You
can enable the device to encrypt the password using TLS (see the
'Use SSL' parameter below).
LDAP Bind DN
[LdapConfiguration_Ldap
ConfBindDn]
Defines the LDAP server's bind Distinguished Name (DN) or username.
 LDAP-based SIP queries: The DN is used as the username during
connection and binding to the LDAP server. The DN is used to
uniquely name an AD object. Below are example parameter settings:

cn=administrator,cn=Users,dc=domain,dc=com

administrator@domain.com

domain\administrator
 LDAP-based user login authentication: The parameter represents the
login username entered by the user during a login attempt. You can
use the $ (dollar) sign in this value to enable the device to
automatically replace the $ sign with the user's login username in the
search filter, which it sends to the LDAP server for authenticating the
user's username-password combination. An example configuration for
the parameter is $@sales.local, where the device replaces the $ with
the entered username, for example, JohnD@sales.local. The
username can also be configured with the domain name of the LDAP
server.
Note: By default, the device sends the username in clear-text format. You
can enable the device to encrypt the username using TLS (see the 'Use
SSL' parameter below).
LDAP Network Interface
[LdapConfiguration_Interf
ace]
Assigns one of the device's IP network interfaces through which
communication with the LDAP server is done.
By default, no value is defined (None) and the device uses the OAMP
network interface, configured in the Interface table.
For configuring IP network interfaces, see ''Configuring IP Network
Interfaces'' on page 145.
Note: The parameter is mandatory.
Management Attribute
[LdapConfiguration_Mng
mAuthAtt]
Defines the LDAP attribute name to query, which contains a list of groups
to which the user is a member. For Active Directory, this attribute is
typically "memberOf". The attribute's values (groups) are used to
determine the user's management access level; the group's
corresponding access level is configured in ''Configuring Access Level per
Management Groups Attributes'' on page 256.
Notes:
 The parameter is applicable only to LDAP-based login authentication
and authorization (i.e., the 'Type' parameter is set to Management).
 If this functionality is not used, the device assigns the user the
configured default access level. For more information, see ''
Configuring
Access Level per Management Groups Attributes'' on page 256.
Use TLS
[LdapConfiguration_useT
LS]
Enables the device to encrypt the username and password (for Control
and Management related queries) using TLS when sending them to the
LDAP server.
 [0] No = (Default) Username and password are sent in clear-text
format.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English