Version 7.0 315 Mediant 3000
User's Manual 17. Quality of Experience
Parameter Description
Ingress Video Bandwidth
[BWProfile_IngressVideoBandwid
th]
Defines the incoming video traffic threshold (in Kbps).
Total Egress Bandwidth
[BWProfile_TotalEgressBandwidt
h]
Defines the total (video and audio) outgoing bandwidth threshold
(in Kbps).
Total Ingress Bandwidth
[BWProfile_TotalIngressBandwidt
h]
Defines the total (video and audio) incoming bandwidth threshold
(in Kbps).
Warning Threshold
[BWProfile_WarningThreshold]
Defines the threshold (in percentage) of the bandwidth thresholds
that if exceeded is considered a Warning alarm (Green-Yellow
threshold). This applies to any of the configured bandwidth
thresholds. The Hysteresis is also added to this Warning
threshold. For example, if set to 70% and the Hysteresis to 10%,
when the current outgoing voice traffic exceeds 80% of the
configured threshold, the Yellow state occurs and a Warning
threshold alarm is sent if 'Generate Alarm' is set to Enable.
Hysteresis
[BWProfile_hysteresis]
Defines the bandwidth fluctuation (change) from the bandwidth
threshold value (in percentage). The threshold is considered
crossed if bandwidth exceeds the configured threshold plus this
hysteresis, and a Red state occurs. For example, assume the
parameter is set to 10% and the configured bandwidth threshold
is set to 64000 Kbps. If current bandwidth reaches 70,400 Kbps
(additional 10%), the threshold is considered crossed.
Generate Alarm
[BWProfile_GenerateAlarms]
Enables the generation of an SNMP alarm if the threshold (with
the hysteresis) is crossed.
 [0] Disable (default)
 [1] Enable
If enabled, an alarm is sent if one of the following scenarios
occurs:
 Warning threshold is exceeded (Warning severity - Yellow
threshold).
 Any configured bandwidth threshold is exceeded (Major
severity - Red threshold).
To Next Page
Loading...
Need help?
General
