User's Manual 318 Document #: LTRT-89730
Mediant 3000
Parameter Description
Index
[MediaEnhancementRules_RuleI
ndex]
Defines the index of the table row entry.
Trigger
[MediaEnhancementRules_Trigg
er]
Defines the monitored metrics parameter or bandwidth
associated with this rule.
 [0] MOS (default)
 [1] Delay
 [2] Packet Loss
 [3] Jitter
 [4] Bandwidth
Color
[MediaEnhancementRules_Color]
Defines the color-coded threshold change of the monitored
metrics or bandwidth (configured in the 'Trigger' parameter) for
which this rule is done.
 [0] Red (default) = Yellow-to-Red threshold is crossed.
 [1] Yellow = Green-to-Yellow threshold is crossed.
Rule Action
[MediaEnhancementRules_Actio
nRule]
Defines the action that the device performs when the color-coded
threshold is crossed:
 [0] Accept Calls (default)
 [1] Reject Calls
 [2] Alternative IP Profile = An alternative IP Profile is used, as
configured in the 'Value' field (below).
Notes:
 If the parameter is set to a restrictive action (i.e., Reject Calls
or Alternative IP Profile) for Yellow and no action is set for
Red, the device also applies the Yellow action to Red, if this
color-coded threshold occurs.
 If the parameter is set to a permissive action (i.e., Accept
Calls) for Red and no action is set for Yellow, the device
applies the same action to Yellow, if this color-
occurs.
Alternative IP Profile ID
[MediaEnhancementRules_Actio
nValue]
Defines an alternative IP Profile ID for the IP Group that is
associated with this rule, if this rule is applied. The parameter is
applicable only if the 'Rule Action' parameter is set to Alternative
IP Profile.
To Next Page
Loading...
Need help?
General
