User's Manual 338 Document #: LTRT-89730
Mediant 3000
The following procedure describes how to configure SIP interfaces through the Web
interface. You can also configure it through ini file (SIPInterface).
 To configure a SIP Interface:
1. Open the SIP Interface table (Configuration tab > VoIP menu > VoIP Network > SIP
Interface Table).
2. Click Add; the following dialog box appears:
3. Configure a SIP Interface according to the parameters described in the table below.
4. Click Add.
Table 18-5: SIP Interface Table Parameter Descriptions
Parameter Description
Index
[SIPInterface_Index]
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
SRD
[SIPInterface_SRDName
]
Assigns an SRD to the SIP Interface.
If only one SRD is configured in the SRD table, the SRD is assigned to
the SIP Interface by default. If multiple SRDs are configured in the SRD
table, no value is defined.
For configuring SRDs, see ''Configuring SRDs'' on page 326.
Notes:
 The parameter is mandatory.
 You can assign the same SRD to multiple SIP Interfaces (SBC and
Gateway).
 For the SAS application, use only SRD 0.
Name Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 21 characters. By default, if you do not
To Next Page
Loading...
Need help?
General
