User's Manual 358 Document #: LTRT-89730
Mediant 3000
Table 18-7: Proxy Sets Table and Proxy Address Table Parameter Description
Parameter Description
Proxy Sets Table
Index
[ProxySet_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
SRD
[ProxySet_SRDName]
Assigns an SRD to the Proxy Set.
Notes:
 The parameter is mandatory and must be configured first before you can
configure the other parameters in the table.
 To configure SRDs, see Configuring SRDs on page 326.
Name
[ProxySet_ProxyName
]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
Gateway IPv4 SIP
Interface
[ProxySet_GWIPv4SI
PInterfaceName]
Assigns an IPv4-based SIP Interface for Gateway calls to the Proxy Set.
Notes:
 At least one SIP Interface must be assigned to the Proxy Set.
 The parameter appears only if you have configured a network interface
with an IPv4 address in the Interface table (see Configuring IP Network
Interfaces on page 145).
 To configure SIP Interfaces, see Configuring SIP Interfaces on page 337.
SBC IPv4 SIP
Interface
[ProxySet_SBCIPv4SI
PInterfaceName]
Assigns an IPv4-based SIP Interface for SBC calls to the Proxy Set.
Notes:
 At least one SIP Interface must be assigned to the Proxy Set.
 The parameter appears only if you have configured a network interface
with an IPv4 address in the Interface table (see Configuring IP Network
Interfaces on page 145).
 To configure SIP Interfaces, see ''Configuring SIP Interfaces'' on page
337.
SAS IPv4 SIP
Interface
sasipv4-sip-int-name
[ProxySet_SASIPv4SI
PInterfaceName]
Assigns an IPv4-based SIP Interface for SAS calls to the Proxy Set.
Notes:
 At least one SIP Interface must be assigned to the Proxy Set.
 The parameter appears only if you have configured a network interface
with an IPv4 address in the Interface table.
Gateway IPv6 SIP
Interface
[ProxySet_GWIPv6SI
PInterfaceName]
Assigns an IPv6-based SIP Interface for Gateway calls to the Proxy Set.
Notes:
 At least one SIP Interface must be assigned to the Proxy Set.
 The parameter appears only if you have configured a network interface
with an IPv6 address in the Interface table.
SBC IPv6 SIP
Interface
[ProxySet_SBCIPv6SI
PInterfaceName]
Assigns an IPv6-based SIP Interface for SBC calls to the Proxy Set.
Notes:
 At least one SIP Interface must be assigned to the Proxy Set.
 The parameter appears only if you have configured a network interface
with an IPv6 address in the Interface table.
SAS IPv6 SIP Assigns an IPv6-based SIP Interface for SAS calls to the Proxy Set.
To Next Page
Loading...
Need help?
General
