AudioCodes Mediant 3000 User Manual

Version 7.0 365 Mediant 3000
User's Manual 19. SIP Definitions
Parameter Description
[Account_ServedIP
GroupName]
Note:
 The parameter is applicable only to the SBC application.
 By default, all IP Groups are displayed. However, if you filter the Web
display by SRD (using the SRD Filter box), only IP Groups associated with
the filtered SRD are displayed.
Serving IP Group
[Account_ServingIP
GroupName]
Defines the IP Group (Serving IP Group) to where the device sends the SIP
REGISTER requests (if enabled) for registration and authentication (of the
Served IP Group).
 Tel-to-IP calls: The serving IP Group is the destination IP Group configured
in the Trunk Group Settings table or Tel-to-IP Routing table (see
Configuring Tel-to-IP Routing Rules on page 496).
 IP-to-Tel calls: The serving IP Group is the 'Source IP Group ID' configured
in the IP to Trunk Group Routing table (see ''Configuring IP-to-Trunk Group
Routing Rules'' on page 505).
Note: By default, only IP Groups associated with the SRD to which the Served
IP Group is associated are displayed, as well as IP Groups of Shared SRDs.
However, if you filter the Web display by SRD (using the SRD Filter box), only
IP Groups associated with the filtered SRD are displayed, as well as IP Groups
of Shared SRDs.
User Name
[Account_Username
]
Defines the digest MD5 Authentication username.
The valid value is a string of up to 50 characters.
Password
[Account_Password]
Defines the digest MD5 Authentication password.
The valid value is a string of up to 50 characters.
Host Name
[Account_HostNam
e]
Defines the Address of Record (AOR) host name. The host name appears in
SIP REGISTER From/To headers as ContactUser@HostName. For a
successful registration, the host name is also included in the URI of the INVITE
From header.
The valid value is a string of up to 49 characters.
Note: If the parameter is not configured or if registration fails, the 'SIP Group
Name' parameter value configured in the IP Group table is used instead.
Register
[Account_Register]
Enables registration.
 [0] No= (Default) The device only performs authentication (not registration).
Authentication is typically done for INVITE messages sent to the "serving"
IP Group. If the device receives a SIP 401 (Unauthorized) in response to a
sent INVITE, the device checks for a matching "serving" and "served" entry
in the table. If a matching row exists, the device authenticates the INVITE
by providing the corresponding MD5 authentication username and
password to the "serving" IP Group.
 [1] Regular = Regular registration process. For more information, see
''Regular Registration Mode'' on page 366.
 [2] GIN = Registration for legacy PBXs, using Global Identification Number
(GIN). For more information, see ''Single Registration for Multiple Phone
Numbers using GIN'' on page 366.
Notes:
 Gateway application: To enable registration, you also need to set the
'Registration Mode' parameter to Per Account in the Trunk Group Settings

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English