User's Manual 474 Document #: LTRT-89730
Mediant 3000
Parameter Description
[0], International [1], National [2], Network Specific [3], Subscriber [4]
or Abbreviated [6].
The default is 'Unknown'.
Notes:
 The parameter is applicable only to number manipulation tables for
IP-to-Tel calls.
 TON can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.
 For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
NPI
[NumberPlan]
Defines the Numbering Plan Indicator (NPI).
 [0] Unknown (default)
 [9] Private
 [1] E.164 Public
 [-1] Not Configured = value received from PSTN/IP is used
Notes:
 The parameter is applicable only to number manipulation tables for
IP-to-Tel calls.
 NPI can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.
 For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
Presentation
[IsPresentationRestricted]
Enables caller ID.

 [0] Allowed = Sends Caller ID information when a call is made using
these destination/source prefixes.
 [1] Restricted = Restricts Caller ID information for these prefixes.
Notes:
 This field is applicable only
to number manipulation tables for source
phone number manipulation.
 If this field is set to Restricted and the 'Asserted Identity Mode'
(AssertedIdMode) parameter is set to Add P-Asserted-Identity, the
From header in the INVITE message includes the following: From:
'anonymous' <sip: anonymous@anonymous.invalid> and 'privacy:
id' header.
To Next Page
Loading...
Need help?
General
