Avery Dennison SNAP 500 - Page 144

AVERY DENNISON Technical Support
Product / Services
Installation Report
Customer:
Failure Report #:
(For office use)
Address:
Service Report #:
Failure Reported
By:
Date:
Model #:
Contact:
Serial #:
Phone #:
Mfg. Date:
(For office use)
Out of Box
Failure
Yes
No
Within 30 Days of installation
Yes
No
Total Inches
---
Within Warrantee
Yes
No
Total Cuts
---
If within Warrantee, which month
.
Failure Codes
Code
Description
Code
Description
100
Normal user Adjustments only, not a failure.
106
Non-operating (bad) electronic part, not visually
broken.
101
Could not repair, (return machine to
engineering).
107
Non-operating (bad) mechanical part, not visually
broken.
102
Visually broken or bent electrical parts.
108
Re-adjustment required internally to function.
103
Visually broken or bent mechanical part.
109
Re-adjustment required externally to function.
104
Missing Electrical part, machine won’t
function.
110
Part fell off or disconnected, put back on, still good.
105
Missing mechanical part, machine won’t
function.
111
Missing Supplies or Formats
Description Of Failure