User’s Manual—SNAP™ 500 Gen 1 and Gen 2 49
Classification: Avery Dennison - Public
Figure 15B: LED Locations
5.2.5 Static Brush
The static brush has been mounted with a thumbscrew for easy adjustment to
help guide and control labels into the stacker. The brush should contact the
material as it exits the nip rollers. The static brush should be maintained in good
condition for the best stacking.
In general – a light pressure is sufficient to stack well, but long feeds will require
slightly more pressure.
Keep the static brush parallel to the nip roller mount bracket.
To Next Page
Loading...
