Bacci Twin - 5.5.1 Stop and re-start procedure after an EMERGENCY

TWIN – Use and maintenance instruction manual
Chap. 5
- 24/48 -
5.5.1 Stop and re-start procedure after an EMERGENCY
In the event of a sudden machine stop, be it intentional or accidental, correct function re-start depends
on how the machine has been stopped.
Proceed as described following.
STEP ACTION DESCRIPTION
1
Press the
emergency
pushbutton
• Before using the machine, all persons involved must be familiar with the
location and use of all the emergency pushbuttons on the machine shown in
the pictures.
INFORMATION!
Pressing an emergency pushbutton (12) stops the machine in emergency mode
and transmits the stop signal. Pressing an emergency pushbutton also cuts off
power to the axes and spindles.
2
Restart
procedure
To re-start the machine:
• Remove the cause for the machine stop.
• Release the "Emergency" pushbutton (12)
Turn the pushbutton to the left.
• Press the "Reset" key (9)
3
Turn on
auxiliaries
Press the "Turn on Auxiliaries" pushbutton (8)
The "Grid connected" pilot light (1) turns on.