TWIN – Use and maintenance instruction manual
Chap. 4
- 18/20 -
4.6.3 Illumination and aeration
Provide for natural or artificial lighting sufficient to safeguard operator health and safety.
Make sure that the environment is well aired to safeguard operator health.
4.6.4 Dust removal system
The vacuum system is not provided with the machine. For correct and safe machine use, the machine
must be connected to a dust removal system that meets the specifications provided in ANNEX B
TECHNICAL DIAGRAMS AND GENERAL INFORMATION.
4.7 Assembly
The machine is assembled by Bacci technicians, as assembly may present risks for un-specialized
personnel and requires specific and unique manufacturer know-how.
The information provided in this manual provides a minimal description of the tasks to be carried out.
During cleaning and installation, designated personnel must use all appropriate personal protective
equipment (overalls, gloves, glasses, etc.) and must be familiar with machine access procedures and
residual risks associated to the tasks being carried out.
Personnel must be informed of the safety procedures and risks present in the customer’s plant.
4.7.1 Anchoring the machine
To position the machine, proceed as described below.
STEP ACTION DESCRIPTION
1
Safety checks
• Before working on any machine circuit or component, it is OBLIGATORY to
always verify that there is no residual voltage or pressure in the systems,
making sure that work is carried out safely and that all safety devices are in
place and working. Also make sure that all personnel in the vicinity have
been warned of the work being carried out.
Check that all operators are in a safe position and aware of the work being
carried out.
2
Warnings /
Precautions
•
Danger of bumping into the machine structure or parts. Move
cautiously during inspection work.
•
Danger of slipping, tripping and falling inside the machine. Move
cautiously during work.
3
Positioning
diagram
• Position the machine in conformity with the measurements shown in the
diagram contained in ANNEX B TECHNICAL DIAGRAMS AND GENERAL
INFORMATION.
To Next Page
Loading...