Bacci Twin - Connection to Power Supplies

TWIN – Use and maintenance instruction manual
Chap. 4
- 20/20 -
4.7.2 Removing safety guards and blocks used for transportation
Once the machine has been anchored to the ground, remove all the safety guards and blocks used
during transportation.
4.8 Connection to power supplies
The wires and cables between the machine and the electrical cabinet are removed for ease of
transportation.
• Connect the machine cables and wires to the electrical cabinet following the wiring diagram.
• The position of the electrical power supply connection points is shown in ANNEX B TECHNICAL
DIAGRAMS AND GENERAL INFORMATION.
• For electrical and pneumatic connection information, please consult the technical data.
DANGER!
The customer shall be liable for any damage deriving from the machine being connected to electrical
and/or compressed air power supplies that are not conformant to the specifications provided here
following..