TWIN – Use and maintenance instruction manual
Chap. 2
- 40/52 -
2.16.4 Residual risks during handling and transportation
2.16.4.1 Handling and transportation– (Risk ID: 07.01)
IDENTIFICATION RISK ASSESSMENT
Stage: Transportation, installation and assembly
Person: Specialised technician
Area: Z00 All areas
Initial risk: HIGH
RESIDUAL RISK: MEDIUM
PLr (EN 13849): -
SIL (EN IEC 62061): -
ACCIDENT SCENARIO
Consequence:
1.3 Crushing
1.4 Cutting or shearing
Situation:
Working near machine parts being hoisted during handling and transportation
operations.
Event:
Various risks (crushing, shearing) deriving from handling of machine or machine.
1.3 CRUSHING:
- Under falling parts being handled
- Between machine parts being handled and surrounding structures (plant, other
machines).
- Between machine parts being handled and cables or straps used for hoisting.
1.4 CUTTING OR SHEARING:
- Between machine parts being handled and surrounding structures (plant, other
machines).
Body part:
Entire body, upper limbs, hands
RESIDUAL RISK
Various risks (crushing, shearing) deriving from handling of machine or machine parts.
Crushing:
- Under falling parts being handled
- Between machine parts being handled and surrounding structures (plant, other machines).
- Between machine parts being handled and cables or straps used for hoisting.
Cutting or shearing:
- Between machine parts being handled and surrounding structures (plant, other machines).
LIMITATION MEASURES
Mechanical:
Anchor and hook-up points for hoisting equipment.
Electrical:
-
Informative:
- This operation is reserved exclusively to expert personnel (EXP) with significant
know-how and experience such as to allow for proper assessment of the risks and
avoidance of the hazards engendered by the task.
- Mark off the work area and forbid access by unauthorised persons.
- Follow assembly instructions.
The employer is required to use only expert personnel (EXP) for handling.
Symbols:
Indication of hoisting points (WARNING AO2)
To Next Page
Loading...