CHAPTER 6 – Maintenance
Chap. 6
- 13/32 -
6.4.1.2 Greases for the centralized greasing system
For the centralized greasing system (1), use grease that has the characteristics specified in the table
below.
TYPE OF GREASE
NLGI-0 (or equivalent)
NLGI-1 (or equivalent)
MAINTENANCE NOTE
Machine
maintenance
information
Risk of damage to the machine.
Use only grease that is resistant to high pressure, otherwise, if the oil soaps separate
inside the lubricant grease, they may then solidify and jam up the pneumatic system.
Use only one of the greases specified above. Other products may be incompatible with
the product used by the manufacturer for initial greasing. Incompatible greases mixed
together or used one after they other may create substances that are damaging for
machine operation, thereby compromising machine safety.
To Next Page
Loading...