CHAPTER 6 – Maintenance
Chap. 6
- 27/32 -
6.7 Monthly machine maintenance
AUTONOMOUS MAINTENANCE TIMETABLE – WEEKLY CLEANING
TYPE OF
MAINTENANCE
QUALIFICATION OF
MAINTENANCE
PERSONNEL
PERSONNEL
REQUIRED
MACHINE STATE
Cleaning
Operators
1 (one) MACHINE CUT-OFF
MAINTENANCE EQUIPMENT AND MATERIALS
ACTIVITY
STEP ACTION DESCRIPTION
1
Safety checks
• Before working on any circuit or component, it is OBBLIGATORY to
check for residual voltage or pressure in the systems, making sure to
always work in safe conditions.
• Risk of bumping into the machine structure and parts. Move cautiously
while carrying out maintenance.
•
Risk of slipping, tripping and falling on machining scraps.
Move cautiously while carrying out maintenance.
• Risk of dust and materials being flung or sucked in.
• In addition to commonly used PPE, based on the maintenance being
carried out also use one of the following:
, PVC coveralls;
; , .
2
Clean
• Discharge the condensation from the electrical cabinet conditioner
(1). See the attached manual.
6.7.1 Centralized Lubrication of Linear Axes (OIL LUBRICATION)
MAINTENANCE NOTE
Machine
maintenance
information
Check proper functioning of the lubrication system and the oil level in the tank.
To Next Page
Loading...