TWIN – Use and maintenance instruction manual
Chap. 3
- 18/28 -
3.7.13 Standard workpiece locking
The standard version of the machine is equipped with 4 pneumatic pressers (2 for each table)
easily anchored to the shelves by means of dovetail guides, for optimal locking.
3.7.14 Optional workpiece locking
For special applications (press-curved wood) specific pneumatic pressers can be supplied, with
holding power up to 2000 kg. They also can be positioned on the long sides of the TGVs.
Further possibilities for special applications are special pneumatic pressers, adjustable in height,
for locking the pieces without any need for making counterprofile piece-holders.
To Next Page
Loading...