Bacci Twin - SINGLE PITCH Loading;Unloading (Work Cycle)

CHAPTER 5 – Controls and use
Chap. 5
- 29/48 -
OPERATIONS IN MANUAL MODE
USER DESCRIPTION
Maintenance personnel
The following tasks must be carried out with the machine in manual
mode:
• Machine equipping
• Machine cleaning
• Machine maintenance
INFORMATION!
Any other operation is forbidden in manual mode.
5.6.3 SINGLE PITCH loading/unloading (work cycle)
The machine must be used by the operator or maintenance technician for normal
machining of materials.
STEP DESCRIPTION
1
Load the piece program.
2
Press the “Start cycle” pushbutton.