Bacci Twin - Safety and Warning Signs

CHAPTER 2 – Safety information
Chap. 2
- 9/52 -
2.4 Safety and warning sings
2.4.1 Description of hazard images
DANGER IMAGES 1 of 4
SYMBOL
DESCRIPTION OF HAZARD INDICATIONS/WARNINGS
Cutting, shearing
If manual equipment is used, take care to
prevent cuts and shears. Follow the safety
provisions and wear the appropriate PPE
(safety gloves against general risks).
Guillotining, excision
Keep a safe distance from the indicated
zones to prevent guillotining or excision
hazards due to the movement of machine
parts or to the presence of sharp parts.
Follow the safety provisions.
Snagging and dragging
Keep a safe distance from the indicated
zones to prevent snagging and dragging
hazards with the product or moving belts
and consequent dragging. Follow the
safety provisions.
Dragging
Keep a safe distance from the areas
indicated so as to avoid dangers of
dragging between rollers and rotating
components. Follow the safety provisions.
Snagging and dragging
Keep a safe distance from the indicated
zones to prevent snagging and dragging
with moving members or mechanical
components. Follow the safety provisions.
Crushing of upper limbs
Keep a safe distance from the indicated
zones to prevent limb crushing. Do not
insert your hands into the sliding guides of
the machine units to prevent hazards due
to the movement of the devices. Watch out
for all movements of the unit where the
image is located. Follow the safety
provisions.