TWIN – Use and maintenance instruction manual
Chap. 2
- 10/52 -
DANGER IMAGES 2 of 4
SYMBOL
DESCRIPTION OF HAZARD INDICATIONS/WARNINGS
Crushing of lower limbs
Keep a safe distance from the indicated
zones to prevent lower limb crushing.
Watch out for all movements of the unit
where the image is located. Follow the
safety provisions.
Impact
Be careful near protruding or sharp
machine parts. Follow the safety
provisions.
Shock hazard (head or parts of the
body) or snagging
Be careful near protruding or sharp
machine parts and any hindrances. Follow
the safety provisions.
Falling in openings/hatches
Watch out for holes in the floor and for any
ports or trap doors.
Slipping and falls
Watch out for objects or slippery
substances on the floor. Immediately
remove the objects and clean the floor from
substances.
Tripping and falls
Watch out for foreign matter laying on the
floor that could cause tripping. Immediately
remove the obstacles.
Danger of falling from above
In case of overhead work. Comply with the
safety dispositions and adopt the
appropriate PPE (safety belt).
Danger of falling due to height
differences
Watch out for any differences in the height
of different machine zones.
Dangers of an electrical nature
Be careful near the indicated zones.
Maintain a safety distance in order to avoid
dangers stemming from direct or indirect
contact with parts or equipment with
voltage. Follow the safety provisions and,
in case of operations, wear the appropriate
PPE (safety gloves against electrical risks).
Heat-related hazards
Be careful near the indicated zones.
Maintain a safety distance to prevent burns
caused by high temperatures. Follow the
safety provisions and wear the appropriate
PPE (safety gloves against heat and fire-
related hazards).
To Next Page
Loading...