Bacci Twin - 2.16.7 Rischi residui presenti durante gli interventi di lubrificazione;ingrassaggio; 2.16.7.1 Lubrication;greasing - (Risk ID: 11.01)

TWIN – Use and maintenance instruction manual
Chap. 2
- 44/52 -
2.16.7 Rischi residui presenti durante gli interventi di lubrificazione/ingrassaggio
2.16.7.1 Lubrication/greasing – (Risk ID: 11.01)
IDENTIFICATION RISK ASSESSMENT
Stage: Use
Person: Maintenance personnel
Area: Z00 All areas
Initial risk: MEDIUM
RESIDUAL RISK: LOW
PLr (EN 13849): -
SIL (EN IEC 62061): -
ACCIDENT SCENARIO
Consequence:
7.9 Poisoning
7.10 Sensitisation
Situation:
Handling of lubricants and greases and/or parts that have come into contact with
lubricants or grease used to lubricate rollers, supports, gear motors, etc.
Event:
- Various risks (7.9 poisoning, 7.10 sensitisation) deriving from skin or eyes coming
into contact with lubricants or ingestion of lubricants.
- Risk of environmental pollution deriving from lubricant spills.
Body part:
Entire body.
RESIDUAL RISK
Risk of poisoning or sensitisation deriving from skin or eyes coming into contact with lubricants or
ingestion of lubricants.
- Risk of environmental pollution deriving from lubricant spills.
LIMITATION MEASURES
Mechanical:
-
Electrical:
-
Informative:
Lubricants (greases and oils) are toxic and noxious. Follow the prodcer safety
information.
Always use personal protective equipment (PPE) for all tasks where there is a
foreseeable risk of coming into contact with lubricants.
Waste lubricants must be disposed of by orgnisations authorised to collect and
dispose of these types of substances.
Symbols:
-