TWIN – Use and maintenance instruction manual
Chap. 2
- 4/52 -
2.1 Qualification of personnel
This manual provides instructions on use and maintenance, lists the hazards and residual risks of the
machine but does not take into account the risks of the work environment and the specific work
modalities of the company using the machine.
As to the choice of the personnel responsible for operating the machine, it is up to the
employer to make sure that the duties assigned to workers are compatible with the
qualification and level of information and training required. It is indispensable that
qualified personnel such as operators, maintenance personnel and technicians, for
definitions see chapter 00, is exclusively made up of Expert Persons (EXP), and
Informed Persons (INFP) and not Common Persons (COMP).
INFORMATION!
Remember that it is up to the employer to inform and train the personnel
who is going to run the machine; this must be done on the basis of
available knowledge, information and instructions, before working activities
are assigned to workers.
The instructions of use and maintenance provided in this manual are not addressed to
Common Persons (COMP), who are not authorized to run the machine. However,
information on the safety of these persons is provided in this manual to facilitate the
employer to fulfil his duty of instruction and supervision.
INFORMATION!
Remember that instruction and supervision of common persons is up to the
employer.
To Next Page
Loading...