CHAPTER 2 – Safety information
Chap. 2
- 37/52 -
2.16.2.2 Normal operation – (Risk ID: 04.07)
IDENTIFICATION RISK ASSESSMENT
Stage: Use
Person: Operator
Area: Z02 Material loading/unloading area
Initial risk: MEDIUM
RESIDUAL RISK: MEDIUM
PLr (EN 13849): -
SIL (EN IEC 62061): -
ACCIDENT SCENARIO
Consequence:
7.1 Respiratory difficulties, suffocation
7.2 Cancer
Situation:
Dust emissions into the air
Event:
Respiratory difficulties deriving from the presence of dust in the air cause by
material machining.
Body part:
Breathing apparatus
RESIDUAL RISK
Respiratory difficulties deriving from the presence of dust in the air cause by material machining.
LIMITATION MEASURES
Mechanical:
Arrange for connection to a centralised dust removal system (SAFETY MEASURE
M13)
Electrical:
-
Informative:
- Connect the machine to a vacuum system with a capacity equal to that specified
in the technical data.
Symbols:
-
To Next Page
Loading...