Bacci Twin - 5.7.7 Loading and presetting tools

To Next Page

To Previous Page

CHAPTER 5 – Controls and use

Chap. 5

- 37/48 -

5.7.7 Loading and presetting tools

To preset the tools, proceed as follows.

STEP ACTION DESCRIPTION

Positioning

spindle head 1

• Turn the working unit using the manual controls.

Manual pushbutton control: A+ (15) movement pushbutton

A- (16) movement pushbutton

The spindle to be equipped is positioned upwards.

Unscrew ring nut

Unscrew the blocking ring nut (1).

Select clamp

Select the clamp with the diameter best suited to the tool.

Insert the clamp in the taper.

Insert tool

Insert the tool in the clamp and, after having positioned the tool in its seat,

tighten the ring nut.