Bacci Twin - 2.8.1.3 PADLOCK STATION, clamps, padlock checks; 2.8.1.4 Warning lights and horn check; 2.8.1.5 Key management check

CHAPTER 2 – Safety information
Chap. 2
- 25/52 -
2.8.1.3 PADLOCK STATION, clamps, padlock checks
At each use, carry out the following check:
• Check that the padlocks and clamps to lock off and tag out energy supplies are always on hand.
NOTE: padlocks and clamps are not supplied by the machine manufacturer Paolino Bacci S.r.l ,
and must be provided to operating personnel by the employer.
2.8.1.4 Warning lights and horn check
At each use, carry out the following checks:
• Regularly check that the lights and horns are working properly.
2.8.1.5 Key management check
The employer is required to set up a key management procedure. The keys may be used only by skilled
and qualified personnel aware of machine risks.
Always check:
• That the keys are used only for the time required by the intervention. Once the intervention is
completed, they must be removed and stored by the designated person.
• The keys may be used only by authorized and qualified personnel, identified in a written
procedure.
• It is forbidden to duplicate the keys.