Bacci Twin - 2.16.11 Residual risks during height work; 2.16.11.1 Height work - (Risk ID: 16.01)

CHAPTER 2 – Safety information
Chap. 2
- 49/52 -
2.16.11 Residual risks during height work
2.16.11.1 Height work – (Risk ID: 16.01)
IDENTIFICATION RISK ASSESSMENT
Stage: Maintenance
Person: Maintenance personnel
Area: Z00 All areas
Initial risk: HIGH
RESIDUAL RISK: MEDIUM
PLr (EN 13849): -
SIL (EN IEC 62061): -
ACCIDENT SCENARIO
Consequence:
1.11 Slipping, tripping and falling
Situation:
Maintenance work required by the manufacturer for which the maintenance
operator must work at height.
Event:
Risk of slipping, tripping and falling off permanent access equipment and/or
machine structures.
Body part:
Entire body, head.
RESIDUAL RISK
There is a risk of slipping, tripping and falling when climbing, descending or standing on ladders,
scaffolding and/or permanent footbards,
LIMITATION MEASURES
Mechanical:
There is no permanent access equipment.
Electrical:
-
Informative:
- It is forbidden to climb onto machine structures from any point that is not equipped
for climbing.
- Always use permanent access equipment on the machine for all height work.
- Where the machine is not fitted with permanent access equipment, use ladders,
scaffolding and/or moving platforms.
- Wear personal protective equipment /PPE) suited for height work.
- Move carefully when climbing or descending ladders or standing at heights.
Symbols:
-