Bacci Twin - 2.16.13 Residual risks present during safeguarding work; 2.16.13.1 Safeguarding work- (Risk ID: 18.01)

CHAPTER 2 – Safety information
Chap. 2
- 51/52 -
2.16.13 Residual risks present during safeguarding work
2.16.13.1 Safeguarding work– (Risk ID: 18.01)
IDENTIFICATION RISK ASSESSMENT
Stage: Use
Person: Operator
Area: Z03 Inside the machine
Initial risk: MEDIUM
RESIDUAL RISK: MEDIUM
PLr (EN 13849): c
SIL (EN IEC 62061): SIL1
ACCIDENT SCENARIO
Consequence:
1.0 Various mechanical hazards
Situation:
Being trapped inside the all-around enclosures.
Event:
Various risks deriving from the unexpected start-up of machine moving parts.
Body part:
Entire body.
RESIDUAL RISK
Various risks deriving from the unexpected start-up of machine moving parts.
LIMITATION MEASURES
Mechanical:
The access doors are designed to avoid involuntary closing.
Electrical:
The door, once it has been closed, must be reset by pressing the relative reset
pushbutton.
Informative:
In case of becoming trapped, move away from the moving machine parts and
towards the closest door. If necessary, press the closest emergency stop
pushbutton. The door may be unlocked using the unlocking key located near the
interlocking device.
Symbols:
-