Bacci Twin - 2.16.1 Residual risks present during any stage; 2.16.1.1 Passing through or stationing near dangerous areas - (Risk ID: 00.01)

CHAPTER 2 – Safety information
Chap. 2
- 35/52 -
2.16.1 Residual risks present during any stage
2.16.1.1 Passing through or stationing near dangerous areas – (Risk ID: 00.01)
IDENTIFICATION RISK ASSESSMENT
Stage: Any
Person: Common person
Area: Z00 All areas
Initial risk: HIGH
RESIDUAL RISK: LOW
PLr (EN 13849): -
SIL (EN IEC 62061): -
ACCIDENT SCENARIO
Consequence:
1.0 Various mechanical hazards
Situation:
Passing through or stationing near the dangerous machine areas during the various
stages of the life cycle (installation, use, maintenance, etc.)
Event:
Contact with moving machine parts and the product being machined.
Contact with moving machine parts, suspended loads, eqiupment and/or equipment
used during assembly and maintenance.
Contact with toxic and noxious elements used during machine operation.
Risk of permanent damage to hearing apparatus due to high noise and prolonged
exposure to noise sources.
Body part:
Entire body.
RESIDUAL RISK
Common persons who have not been instructed may be exposed to various risks deriving from both the
machine and the work environment. The employer must limit access to dangerous areas on behalf
common persons in specific company procedures.
LIMITATION MEASURES
Mechanical:
-
Electrical:
-
Informative:
- unauthorised personnel may not enter the machine.
- Common persons who, for whatever reason, must pass through or station near
the machine must always be accompanied by personnel who have been trained
and informed regarding the risks, who must keep an eye on common persons.
Symbols:
- Access denied to unauthorised personnel signs (WARNING AD01).
- Ground signs limiting and identifying dangerous areas.
- Internal company procedures.