TWIN – Use and maintenance instruction manual
Chap. 3
- 6/28 -
3.5 Manufacturing features
The machine is divided in two work stations. The control panel, located on one side of the
machine, contains separate controls for each station.
The machine is composed of the following main groups or units:
• Single-strut machine body
• Z-axis carriage
• Y-axis carriage
• X-axis
• Work heads / electric spindles
• Numerical control
• Centralized lubricating and greasing system
• Electrical cabinet
• External safety enclosure.
The optional units that may be provided (on request) with the machine are described here
following.
To Next Page
Loading...