601–426 /17 F70 Series124
Image 8–38 Warp menu, Warp files
The Warp Files menu is displayed.
Image 8–39 Example of the Warp files menu
3. Make sure the Enable slider is set to right.
4. Select the desired warp file.
Image 8–40 Example of the Warp files menu
8.4.7 Warping – Latency control in a multi projector setup
Transport latency
The added delay in the image processing chain. The value is the number of lines relative to the
output resolution.
Latency
The total time from the first pixel is coming in on an input source, until the first light representing that
pixel is visible on the screen. This includes the transport delay. The value is normally given in
milliseconds.
Installation menu
To Next Page
Loading...
Need help?
General
