601–426 /17 F70 Series146
Image 9–3 Profile edit menu
2. Use the arrow keys to select New Profile... and confirm.
The New Profile pane is expanded and fully displayed.
Image 9–4 Example of the new profile pane
3. Use the arrow keys and the OK key to select any of the settings you wish to save in this macro.
4. Select the field next to Profile Name and confirm with the OK key to make a keyboard prompt on the
projector display.
5. Use the keyboard on the display to enter a valid macro name. Confirm with the enter key once completed.
6. Select CREATE and confirm to save the current profile settings.
9.3 Assigning a created projector profile to a
preset
This procedure assumes you have created at least one projector profile. .
How to assign a projector profile to a preset
1. In the main menu, select Profiles → Edit.
GUI – Profiles
To Next Page
Loading...
Need help?
General
