601–426 /17 F70 Series174
3. If you selected Profile, select the desired profile you want to activate.
4. Select the desired Time the command will need to activate (in hours and minutes of the day).
Note: Make sure the projector time is correctly configured. For more info, see “Date and time setup
- automatically”, page 161 and “Date and time setup - manually”, page 160.
Tip: If you click or tap on the hour and minute marker, a time slider will pop up. Use the hours and
minutes sliders to select the desired timeframe and confirm.
5. Select the desired days of the week when this command will need to activate. Use the arrow keys to select
the desired days and confirm.
Image 11–6 Example of the Add Command menu with command, time and days of the week selected.
6. Click Apply to add the new command to the scheduler.
The new command is added to the Scheduler.
Image 11–7 Example of the Scheduler menu, with Power On being added.
11.4 Edit or delete
How to edit or delete a command
1. In the Scheduler menu, select and confirm an existing command.
The Edit Command window will be prompted.
Scheduler
To Next Page
Loading...
Need help?
General
