173601–426 /17 F70 Series
Image 11–3 Example of the Add Command window
2. Select the type of command you would like to add to add. You have the following options
a) Power On (ON mode).
b) Power Off (Ready and or Standby mode).
c) Activate a projector profile.
Tip: In order to activate a projector profile in the scheduler, a minimum of one projector profile will
need to be configured beforehand. If no profile is available, the “Profile” option will not be available
in the “Add Command” window.
Image 11–4
For more info on creating Projector Profiles, see “GUI – Profiles”, page 143
If Profile is selected, the currently available projector Profiles will be listed in the menu.
Image 11–5 Example of the Add Command window with the available profiles listed
Scheduler
To Next Page
Loading...
