167601–426 /17 F70 Series
Image 10–33 Maintenance Sub-menu
10.7 Lens calibration
About calibration
This function will calibrate the position of the iris and the horizontal and vertical lens shift. The purpose is to
have an accurate feedback to the system
Calibration
1. Enter the menu Settings / Maintenance / Lens calibration.
2. Select the feature that shall be calibrated, and press enter on the remote control
Image 10–34
3. Press enter to execute.
10.8 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
System settings menu
To Next Page
Loading...
