Barco F70-4K4 - Page 22

601–426 /17 F70 Series22
Image Description
This projector may become RG3 when an interchangeable lens with throw ratio greater than 4.7 is
installed. Refer to the manual for the lens list and hazard distance before operation. Such
combinations of projector and lens are intended for professional use only, and are not intended
for consumer use.
Ce projecteur peut devenir un projecteur RG3 en cas d'installation d'un objectif interchangeable
dont le rapport de projection est supérieur à 4.7. Veuillez vous reporter au manuel pour en savoir
plus sur la liste des objectifs et la distance de sécurité avant toute utilisation. De telles combinaisons
entre projecteur et objectif sont conçues pour des applications professionnelles uniquement et pas
pour des applications grand public.
4.7 RG3
consider hazard distance and
installation requirements for RG3
product. Refer User manual.
For F70 Series: FDA Label
THIS PRODUCT IS IN CONFORMITY WITH
PERFORMANCE STANDARDS FOR LASER
PRODUCTS UNDER 21 CFR 1040, EXCEPT
WITH RESPECT TO THOSE CHARACTERISTICS
AUTHORIZED BY VARIANCE NUMBER
2016-V-0144 EFFECTIVE ON DECEMBER 12,
2019.
F70 EMC Label
This is a class A product. In a domestic environment this product
may cause radio Interference in which case the user may be
r
equired to take adequate measures.
This device complies with part 15 of the FCC Rules, Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Th
is Class A digital apparatus complies with Canadian ICES-003, / Cet appareil numerique
de Ia
classe est conforme à Ia norme NMB-003 du Canada.
EMC:
FC
C:
CANADA:
IEC EN 60825-1
CL
ASS 1 LASER PRODUCT
RG2 IEC EN 62471-5
F90 EMC Label
This Class A digital apparatus complies with Canadian ICES-003, / Cet
appareil numerique de Ia classe est conforme à Ia norme NMB-003 du
Canada.
CANADA:
This device complies with part 15 of the FCC Rules, Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC:
This is a class A product. In a domestic environment this product may
cause radio Interference in which case the user may be required
to take adequate measures.
EMC:
RG2 IEC EN 62471-5
IEC EN 60825-1
CLASS 1 LASER PRODUCT
Location of Safety Label
8
9
EMC Label Warning Label
Image 1–6 F90 Projector
Warning and EMC labels
Image 1–7 F70 Projector
CAUTION: This product contains chemicals, including lead, known to the State of California to
cause birth defects or other reproductive harm. Recycle properly, do not dispose of in ordinary
waste!
Safety