601–426 /17 F70 Series90
Entering Contrast, Brightness, Saturation, Sharpness or Gamma menus from the
keypad.
When entering any of these menus from the Keypad, the screen below will show up in the LCD panel. Use the
arrow keys to select and adjust the values.
Image 7–2
When pressing enter on the value slider, this icon will show up on the OSD (depending which setting that is
enabled, contrast showed here). When in this mode, use the up and down arrow keys to navigate between the
different settings.
Image 7–3 OSD menu
Image menu
To Next Page
Loading...
