To Next Page

To Previous Page

723–0018 /02 F70 93

Code E2000101: “LaserDriver B bank 1 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E2000201: “LaserDriver B heatsink 1 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E2000300: “LaserDriver B bank 1 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E2000400: “LaserDriver B heatsink 1 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E2100101: “LaserDriver B bank 2 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E2100201: “LaserDriver B heatsink 2 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E2100300: “LaserDriver B bank 2 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E2100400: “LaserDriver B heatsink 2 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E2200101: “LaserDriver B bank 3 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E2200201: “LaserDriver B heatsink 3 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E2200300: “LaserDriver B bank 3 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E2200400: “LaserDriver B heatsink 3 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E2300101: “LaserDriver B bank 4 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Troubleshooting

Barco F70 User Manual

Questions and Answers: