To Next Page

To Previous Page

723–0018 /02 F7092

Code E1200400: “LaserDriver A heatsink 3 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E1300101: “LaserDriver A bank 4 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 4

temperature exceeded”.

Code E1300201: “LaserDriver A heatsink 4 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E1300300: “LaserDriver A bank 4 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E1300400: “LaserDriver A heatsink 4 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E1400101: “LaserDriver A bank 5 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E1400201: “LaserDriver A heatsink 5 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E1400300: “LaserDriver A bank 5 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E1400400: “LaserDriver A heatsink 5 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E1500101: “LaserDriver A bank 6 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E1500201: “LaserDriver A heatsink 6 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E1500300: “LaserDriver A bank 6 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 6

temperature reading failure”.

Code E1500400: “LaserDriver A heatsink 6 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Troubleshooting

Barco F70 User Manual

Questions and Answers: